|
|
Hi!
I'm writing to report that after 2 days, I was finally able to run Hantek 6022BL in my Windows 10 Computer!!! 
I did the following steps:
1) Disconnected the USB cable from Hantek device.
2) Downloaded the drivers from Amy's post Hantek6022BL_Driver.zip (the drivers that I'd already had didn't work)
2) Rebooted Windows in the "unsigned drivers mode" (*)
3) Opened Device Manager
4) Clicked in the menu Show / Show Hidden Devices
5) Searched for Hantek devices and uninstalled then all
6) Asserted that the device's button P/H was in the pressed state
7) Connected the USB cable
8) In device manager, I updated the drivers with the ones I had just downloaded. Note that Hantek 1 refused to update, but when I updated Hantek 2 (or something like it), both were updated.
9) I opened the software and voilà!!! It was working. :-D :-D
Awesome! Finally!
Thank you all!
(*) To boot in unsigned drivers mode, I followed the steps described by imnsonia:
shift + (power button >> click restart) >> [ Troubleshooting >> Advanced Options >> Starting Settings >> Restart ],
[Press seven (7)] on dialog window after reboot , this will be disabled "driver signature" for "Null" driver...
However, thy are better illustrated in Method 1 from the page: https://www.maketecheasier.com/i ... -drivers-windows10/
|
|
Post time 2022-1-22 06:29:29