BNC Connectors, where?
Edited by any1ne at 2024-5-2 18:44Hi all
In my 2C42, the contact in the input connector of channel 1 (BNC) began to disappear.
I tried to unsolder it to check and replace it from the generator output channel. But, unfortunately, the pins with which it is soldered to the board broke.
I can't find such connectors on Aliexpress. All the connectors I can find are longer and taller than the original ones.
Tell me, please, where can I buy an original BNC connector?
10X!
You can try to contact Hantek directly to buy the BNC connector.
Emial: service@hantek.com
ying replied at 2024-5-7 11:47
You can try to contact Hantek directly to buy the BNC connector.
Emial:
ying
Thanks!
Pages:
[1]